中文简体
عربى
Product Consultation
Your email address will not be published. Required fields are marked *
Activating a carbon steel CO₂ fire extinguisher involves several steps to ensure its safe and effective use. Here's a general guide on how to activate such an extinguisher:
Assess the Situation: Before attempting to use the fire extinguisher, assess the fire to ensure it is safe for you to tackle and that the extinguisher is appropriate for the type of fire. CO₂ extinguishers are suitable for Class B (flammable liquids) and Class C (electrical) fires.
Position Yourself Safely: Stand at a safe distance from the fire, typically around 6 to 8 feet away. Make sure you have a clear escape route in case the fire becomes uncontrollable.
Pull the Safety Pin: The CO₂ fire extinguisher typically has a safety pin or a tamper seal to prevent accidental discharge. Pull out the safety pin or break the tamper seal by pulling it away from the handle.
Aim at the Base of the Fire: Point the nozzle or horn of the extinguisher at the base of the flames, not at the flames themselves. This is where the fuel source is located, and targeting it helps to effectively extinguish the fire.
Squeeze the Handle: Firmly squeeze the handle or lever to discharge the CO₂ gas. As you do this, the extinguisher will emit a loud horn or discharge noise, indicating that it's functioning.
Sweeping Motion: Using a sweeping motion, move the extinguisher from side to side while continuing to aim at the base of the fire. This helps to ensure complete coverage of the fire and prevents re-ignition.
Monitor the Fire: After the initial discharge, observe the fire to ensure it does not reignite. If necessary, repeat the process or use additional extinguishers until the fire is fully extinguished.
Evacuate if Necessary: If the fire is not extinguished or if it grows beyond your control, evacuate the area immediately and alert others to do the same. Contact emergency services and report the fire.
Remember, safety is paramount when using fire extinguishers. If you are unsure about using the extinguisher or if the fire is too large, do not attempt to fight it yourself. Evacuate the area and call for professional help.
